The Enhancer 3000 Monitoring System allows the researcher to confirm and track key electroporation parameters, including waveform, peak voltage, field strength, pulse length, pulse duration, and frequency in all electroporation generators with external pulse capabilites.

These parameters are critical during optimization sample runs or troubleshooting.

The Enhancer 3000 simply interfaces between the generator and the electroporation chamber (safety stand or BTX electroporation plate handler),

In addition, the optional communications module allows the user to send the waveform information directly to a printer or a computer.

Key Features

• Confirm and track all key electropoation parameters
  
• Monitors all waveforms for optimization or troubleshooting of electroporation parameters
  
• Facilitates calculation of field strength, pulse length, pulse duration or frequency
  
• Safe connections protect user from exposure to high voltage
  
• Optional Communications Module offers standard printer and computer interface
  

Technical Specifications
Enhancer 3000 High Voltage Probe Specifications:
	Attenuation:		1:100 / 1:1000
	Bandwidth:		DC to 70MHz (-3dB)
	Accuracy:		+/- 2%
	Input Voltage:
	-Differential Range:		+/- 700V(DC+Peak AC) or 700Vrms @ 1/100 +/- 7000V(DC+Peak AC) or 5000Vrms @ 1/1000
	-Common Mode Range:		+/- 7000V(DC+Peak AC) or 2500Vrms @ 1/100 & 1/1000
	Output Voltage:
	-Max. Amplitude:		+/- 7V (into 50k ohm load)
	-Offset (typical):		< +/- 5mV
	Ambient Operating Temperature:		-10 to 40°C
	Ambient Operating Humidity:		25 to 85% RH
	Power Requirements:
	-Standard:		4 AA cells or optional mains adapter
	Length of BNC Cable:		35"
	Length of Input Leads:		12"
	Weight:		1 lb
	Dimensions (LxWxH):		8" x 3 ¼" x 1 ½"
Enhancer 3000I High Voltage Interface Box Specifications:
	Input, Output, Probe Connections:
	Type:		4mm Banana Jack
	Voltage:		2500Vrms, 3500Vpk CAT II
	Current (Max. Continuous):		15A
	Current (Peak):		1000A for 100us
	Dimensions (LxWxH):		5.3" x 5.3" x 2.3" (13.5cm x 13.5cm x 5.8cm)

Ordering Information

Notes:

1. Communications module option is required to support printing and computer connection.
   
2. Digital storage oscilloscope is required to display waveforms.